Panasonic WV-SFV6 series Operating Instructions Manual

Contents

Panasonic WV-SFV6 series Operating Instructions Manual Manual pdf 144 page image

13.7.1 Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol notification[Panasonic alarm protocol]Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol accordingto the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.– When an alarm is detected (“Alarm”)– When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)– When the SD memory card has become full (“Diag.”)– When the SD memory card cannot be recognized (“Diag.”)• Default: OffNote• When “On” is selected, notification of the alarm occurrence will be provided to the registered destinationserver addresses in order (to IP address 1 first, to IP address 8 last).144 Operating Instructions13 Configure the alarm settings [Alarm]