Panasonic WV-SPW631LT Installation Manual

Also see for WV-SPW611: Operating instructions Operating instructions

Panasonic WV-SPW631LT Installation Manual Manual pdf 40 page image

40• BasicWV-SPW631LT/WV-SPW631L/WV-SPW611L WV-SPW611Power source* 1: 12 V DC±10 %, PoE (IEEE802.3af compliant: DC36-57 V)Power consumption*1:(PoE: Class 0 device)DC power supply:12 V DC/1080 mA/Approx. 12.9 WPoE Device:48 V DC/360 mA/Approx. 12.95 WDC power supply:12 V DC/670 mA/Approx. 8.1 WPoE Device:48 V DC/230 mA/Approx. 11.1 WAmbient operating environ-ment: –40 °C to +50 °C{–40 °F to 122 °F}* 2Ambient operating humidity: 10 % to 90 % (no condensation)IR LED irradiation distance: 30 m {98.43 feet} –Monitor output (for adjust-ment):VBS: 1.0 V [p-p]/75 Ω, composite, ø3.5 mm mini jack (monaural)An NTSC or PAL monitor can be connected to the camera(use the selector switch or software to select the monitor type).MONITOR OUT conversion plug included(ø3.5 mini-jack⇔RCA jack)External I/O terminals: ALARM IN 1 (DAY/NIGHT IN)/ ALARM IN 2 (ALARM OUT)/ALARM IN 3 (AUX OUT) (x1 each)DAY/NIGHT IN, ALARM OUT, and AUX OUT can be used bychanging the settings of Terminal 1, Terminal 2, and Terminal 3.Microphone/line input: ø3.5 mm monaural mini jackInput impedance: Approx. 2 kΩ (unbalanced)For microphone input: Applicable microphone: Plug-in power typeSupply voltage: 2.5 V±0.5 VRecommended sensitivity of microphone: –48 dB±3 dB(0 dB=1 V/Pa, 1 kHz)For line input: Input level: Approx. –10 dBVAudio output: ø3.5 mm stereo mini jack (monaural output)Output impedance: Approx. 600 Ω (unbalanced)External speaker with an amplifierOutput level: -20 dBVWaterproof*3: Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4X compliantDimensions: 94 mm (W) x 89 mm (H) x 226 mm (L) {3-45/64 inches (W) x3-1/2 inches (H) x 8-57/64 inches (L)}Mass: Approx. 1.4 kg {3.09 lbs}Finish: Main body: Aluminum die cast (Light gray)Dome cover: Clear polycarbonate resin*1 Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further infor-mation about Power source and Power consumption information.*2 When using this product without turning the power off. (However, the temperature inside thecamera shall be -10 °C {14 °F} or higher.) Perform settings or startup operations when theambient temperature is -30 °C {-22 °F} or higher. The auto focus function is not available untilthe heater unit of the camera raises the internal temperature of the camera.*3 Only when installation work is properly performed according to the instructions in this book andappropriate waterproof treatment is performed.Specifications