Panasonic WV-TW310L Installation Manual

Also see for WV-TW310L: Quick start guide Specifications Operating instructions

Contents

Panasonic WV-TW310L Installation Manual Manual pdf 24 page image

24Configure the network settingsInstall the softwareBefore installing the software, read the readme file on the provided CD-ROM first.Software included on the provided CD-ROM• Panasonic IP setting softwareConfigure the network settings of the camera. Refer to the following for further information.• Viewer Software "Network Camera View 4S"It is necessary to install the viewer software "Network Camera View 4S" to display images on aPC and to setup the Wearable Camera basic configuration. Install the viewer software by dou-ble-clicking the "nwcv4Ssetup.exe" icon on the provided CD-ROM. Refer to the WV-TW310Operating Instructions (included in the CD-ROM) for more details.• Wearable Camera Agent SoftwareIt is necessary to install the Wearable Camera Agent Software to upload the video image datafrom the cameras.• Wearable Camera Viewer SoftwareIt is necessary to install the Wearable Camera Viewer Software to play the video image data.Configure the network settings of the camera using thePanasonic IP setting softwareIt is possible to perform the network settings of the camera using the IP setup software on the pro-vided CD-ROM. When using multiple cameras, it is necessary to configure the network settings ofeach camera independently.If the Panasonic IP setting software does not work, configure the network settings of the cameraand the PC individually on the "Network" page of the setup menu. Refer to the OperatingInstructions (included in the CD-ROM) for further information.IMPORTANT:• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert"window may be displayed when starting the IP setup software. In this case, disable "UserAccount Control" from the control panel.• For the security enhancement, the MAC address/IP address of the camera to be configuredwill not be displayed when about 20 minutes have passed after turning on the power of thecamera. (When the effective period is set to "20min" in the IP setup)However cameras in the initial set mode are still displayed even after 20 minutes.• Panasonic IP setting software is inoperable in other subnets via the same router. When config-uring the IP address of the camera for the first time, configure the PC's IP address to192.168.0.xxx.• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).z Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on theprovided CD-ROM.• The License Agreement will be displayed. Readthe Agreement and choose "I accept the termin the license agreement", and click [OK].x Click the [Network Settings] button after select-ing the MAC address/IP address of the camerato be configured.