1 Record and play imagesThe following are descriptions of how to record and play images with the camera.1.1 Start recording1. Connect the battery container.2. Turn the Power button to on.® The PWR indicator lights and then starts blinking quickly. Wait until the PWR indicator lights or startsblinking slowly.3. Press the REC button.® When recording is started, the REC indicator lights or starts blinking slowly.1.2 Stop recording1. Press and hold the REC button for 2 seconds or more.® The REC indicator starts blinking quickly. Processing for stopping recording takes place while theindicator is blinking quickly. When recording has completely stopped, the REC indicator goes off.Note• From [SD memory card recording] - [Recording duration] on the [SD memory card] tab of the “Basic”page, recording can be automatically started or stopped, and recording can be stopped with the timersetting. (®page 20)• When “Recording extension” is selected for “Key function”, and recording is set to be stopped with thetimer setting, the recording time can be extended by pressing the REC button (for less than 2 seconds)during recording.1.3 Play images1. Connect the camera with a PC. It is necessary to install Wearable Camera Agent Software and WearableCamera Viewer Software in advance to play recorded data. Refer to the Installation Guide for furtherinformation.® Data recorded on the camera is uploaded to the PC with Wearable Camera Agent Software installedon the PC.2. Play recorded data uploaded to the PC with Wearable Camera Viewer Software.Refer to the help menu in the PC application for information about how to use the PC application.6 Operating Instructions1 Record and play images