10● Communications with Other StorePersonnel (PAGE)Store personnel wearing the headset can communicatewith each other without being heard by customers.1. Press the button P and speak into the microphone at anormal level.A short beep repeats in the headset to notify all storepersonnel that the system operates in the page mode.2. Press the button P again to release the lock and listento the response from other store personnel.1. Hold down the button P and speak into the microphoneat a normal level.A short beep repeats in the headset to notify all storepersonnel that the system operates in the page mode.2. Release the button and listen to the response fromother store personnel.Notes:• Transmission using the talk button T or P is allowed fora single headset at a time. A continuous beep or dis-torted sound will be heard in a headset when a personwearing the headset presses the button T or P whileanother person is operating.• Maintain a distance of more than 0.3 m {1 ft.} betweenthe headset and the order taker, or more than 1 m {3 ft.}between the headset and the center module.• Prior to operating the order taker unit, confirm that thesystem setup for the order taker unit, center module,and other devices has been completed.OPERATING PROCEDURES● Communications with Customers(TALK)Any store personnel wearing the headset can communicatebidirectionally with any customer who is at the menu board.1. Select a proper sound level by pressing the button + or–.2. You will hear a tone in the headset when a vehiclearrives at the menu board.Note: The tone duration varies depending on the set-tings made in the center module.1. Hold down the button T and speak to the customer.A short beep repeats in the headset.2. Release the button and listen to the customer.1. Press the button T and speak to the customer.A short beep repeats in the headset.2. Press the button again to release the lock and listen tothe customer.Hold downReleasePressPress againHold downPressPress againRelease