14Operating proceduresw Alert notificationWhen the Center Module is WX-CC411 or WX-CC412, storepersonnel wearing this product can send a security alert tothe Center Module. Hold down the [F] button for 2 seconds ormore.p A beep is heard from the speaker of the headset,indicating that the transmission is complete, and asecurity alert is sent to the Center Module. When the Center Module receives a securityalert from this product, it is possible toperform a preset operation (TALK & PAGERecording, Send E-Mail, alert messageplayback, Camera Monitoring, etc.).w External device controlWhen the Center Module is WX-C3010, you can control theexternal device control terminal of the Center Module usingthis product. Hold down the [F] button.p A short beep is heard from the speaker of theheadset and the external device control terminal ofthe Center Module enters the ON state. Release the [F] button.p 2 short beeps are heard from the speaker of theheadset and the external device control terminal ofthe Center Module enters the OFF state.w Dual lane operationIn dual lane operation, this product must select a lane forcommunication.For Normal setupSwitching to Lane BWhen a connection is made to Lane A, the lane indicator islit in orange. Press the [T2] button.p A voice of “Lane B” is heard from the speaker of theheadset and the lane indicator is lit in green. Theconnection is changed to Lane B.Switching to Lane AWhen a connection is made to Lane B, the lane indicator islit in green. Press the [T2] button.p A voice of “Lane A” is heard from the speaker of theheadset and the lane indicator is lit in orange. Theconnection is changed to Lane A.For Direct Lane Select setupSwitching to Lane BWhen a connection is made to Lane A, the lane indicator islit in orange. Press the [T2] button.p A voice of “Lane B” is heard from the speaker of theheadset and the lane indicator blinks green. Theconnection is changed to Lane B. You can talk with acustomer at the menu board of Lane B.Switching to Lane AWhen a connection is made to Lane B, the lane indicator islit in green. Press the [T1] button.p A voice of “Lane A” is heard from the speaker of theheadset and the lane indicator blinks orange. Theconnection is changed to Lane A. You can talk with acustomer at the menu board of Lane A.

operating instructions

Safety precautions

important safety instructions

Before use

Limitation of liability

Precautions

Major operating controls and their functions

Battery loading & replacement

Connecting and disconnecting the headset plug

Operating procedures

Volume adjustment

Alert notification

Communication limitations

Setting the unit

Auto-Talk-Lock setup

Deletion of ID

Center Module search

Setup procedures

Troubleshooting

Specifications

Table of beep tones

Panasonic WX-CT420 Operating Instructions Manual

WX-CT420