Panasonic Workio DP-1520P Operating Instructions Manual

Also see for Workio DP-1520P: Quick guide Service manual

Contents

46Function■ General SettingsNo.00 POWER ON DEFAULT Selects the default operation mode. 1: COPY1:COPY / 2:PRINTER / 3:SCANNER(SCANNER is option, see page 59)01 SORT MEMORY USAGE Selects whether to display the amount of sort 1: OFFmemory used on the control panel.1:OFF / 2:DISPLAY02 DEPT. COUNTER Displays the Total Copy usage and copy limit of Consult yourthe selected department. authorized serviceprovider03 SORT-ROTATE Selects the rotate-sort mode. 1:OFF1:OFF / 2:ON(Available A4 size paper only)09 KEY OPERATOR MODE Inputs the key operator password.ENTER PASSWORD =Modes Function InitialSetting00 GENERAL LIST Prints the general settings list, and meter countreadings.PRESS SET TO PRINT01 PAPER SIZE Selects the Paper Tray and sets the Paper Size.(See page 54)1:TRAY-1 / 2:TRAY-2 / 3:TRAY-3 / 4:TRAY-4(TRAY-2 to 4 are option)A4 → A4 → B5 →B5 → A5 → A5→ FLS1 → FLS2 → LEDGER →LEGAL → LETTER → LETTER →INVOICE →A3 →B4 →03 AUTO RESET TIME Selects the Control Panel reset time. 3:1 min.1:OFF / 2:30 sec / 3:1 min. / 4:2 min. / 5:3 min. /6:4 min.04 ENERGY SAVER MODE Sets the Energy Saver mode and time. 3:SLEEP1:INVALID / 2:POWER SAVER / 3:SLEEP / 10 min.4:SHUTDOWNPower Saver mode timer: 1-240 min.Sleep/Shutdown mode timer: 1-240 min.05 ENERGY SAVER TIME Sets the Energy Saver Timer (power saver mode). Start00:00Start (ON) : 00:00 End (OFF) : 00:00 End00:00Input the Start and End time with Cursor Keysand Keypad. Once you set the Power SaverON/OFF timer, set the timer repeats everyday.06 LANGUAGE DEFAULT Selects the default message language for thedisplay.07 SPECIAL TRAY 1 Selects the paper tray to use for special paper. 1:NONE1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /5:TRAY-4 / 6:BYPASS(TRAY-2 to 4 are options, see page 59)The following Parameter Settings require the input of the Key Operator Password:■ General Settings (For Key Operator)No. Modes Function InitialSettingNOTE: When inputting above General Settings mode No., no need to input the first "0", input only the secondnumber of the two digit display.