Panasonic Workio DP-1520P Operating Instructions Manual

Also see for Workio DP-1520P: Quick guide Service manual

Contents

51Function00 NUMBER OF PRINTS Sets the default number of prints. 11-99901 PAPER SIZE Sets the default paper size setting. A4A3 / B4 / A4 / B5 / A5 / LEDGER / LEGAL /LETTER / INVOICE / FLS1 / FLS202 PAPER TRAY Sets the default Paper Tray selection. AutoAuto / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-403 PRINT DIRECTION Sets the default print orientation setting. 1:PORTRAIT1:PORTRAIT / 2:L-SCAPE04 PRINT DATA Determines the provision of the print data.PRESS SET TO PRINT05 2-SIDED PRINT Selects whether the 2-Sided print setting is 1:OFFenabled.1:OFF / 2:ON06 BIND POSITION Sets the default bind position. 1:LONG EDGE1:LONG EDGE / 2:SHORT EDGE07 RESOLUTION Sets the default resolution setting. 2:600dpi1:300dpi / 2:600dpi / 3:1200dpi08 FONT (PCL)∗1 Sets the default PCL font. 00-9909 SYMBOL TABLE (PCL)∗1 Sets the default PCL symbol table. 110-3510 PITCH (PCL)∗1 Sets the default PCL pitch. 10.000.44-99.9911 POINT SIZE (PCL)∗1 Sets the default PCL point size. 12.004.00-999.7512 LINES/PAGE (PCL)∗1 Sets the default PCL lines/page. 605-12813 RETURN CHARACTER (PCL)∗1 Sets the default PCL return character. 1:CR1:CR / 2:CR+LF14 MUTUAL A4/LETTER Selects whether the mutual size A4/LETTER is 1:OFFenabled.1:OFF / 2:ON15 MAILBOX MEMORY∗2 Indicates the mailbox memory status.PRESS SET TO SELECT19 KEY OPERATOR MODE Inputs the key operator password.ENTER PASSWORD =■ Printer SettingsNo. Modes Function InitialSetting10 TONER SAVE (T/P) Selects the Toner Save Level to use for the 1:NONEText/Photo mode.1:NONE / 2:LEVEL1 / 3:LEVEL211 TONER SAVE (PHOTO) Selects the Toner Save Level to use for the 1:NONEPhoto mode.1:NONE / 2:LEVEL1 / 3:LEVEL212 SADF DEFAULT Selects whether the Job Build and SADF Mode 1:OFFis enabled.1:OFF / 2:ONNo. Modes Function InitialSetting∗1 Available only when the optional Printer Controller Module is installed.∗2 Available only when the optional Hard Disk Drive Unit is installed.