AUTOHEATCOOLDRYOFFAUTOSTDFANSPEEDAIRSWINGAUTO8.9 About Cursor Key Which Points To “OFF” On Remote ControlAUTOHEATCOOLDRYOFFAUTOSTDPRESS "OFF/ON" BUTTONFANSPEEDAIRSWINGAUTO1.2.When the ON/OFF button on the remote control is pressed, the cursor key which points to “OFF” will appear ordisappear to indicate the ON/OFF status of the air conditioner.The air conditioner is running but the cursor key which points to “OFF” appears. The air conditioner can bestopped with any button (Except for “ON/OFF”, “TIMER SET”, “TIMER ON”) pressed.The air conditioner is on standby, but the cursor key which points to “OFF” disappears. The air conditioner canbe started with any button(Except for “ON/OFF”, “TIMER SET”, “TIMER OFF”) pressed.For some reason (Ex. The signal of the remote control does not reach the signal receiver of the indoor unit.), thedisplay of the remote control will not correspond with the actual ON/OFF status of the indoor unit:33CS-PA7DKD / CU-PA7DKD / CS-PC7DKD / CU-PC7DKD8.10. Indoor Fan Motor ControlAutomatic fan speed controlWhen automatic fan speed set, the available range for fan speed is from Hi to Slo.Basic Fan SpeedCooling ModeOperationSoft DryOperationManualAutoCategory Hi Me Lo Lo-ManualAutoManual Fan Speed ControlBasic fan speed can be manually adjusted (Lo, Med, Hi) by using the fan speed selection button.ManualAutoSLo SSLoHeating ModeOperation8.11. Auto restart controlIf the operation is stopped due to a power failure u , it will restart automaticallyun der the previous operation mode when the power supply is resumed.nder any operation mode