Panasonic e.cam NV-GS300 Operating Instructions Manual

Also see for NV-GS280: Operating instructions How to use

Contents

Edit mode48VQT0T29≥If a picture containing a copyright protectionsignal (copy guard) is recorded by the moviecamera, the picture is distorted by mosaic-likepatterns at playback.≥Disconnect the USB cable since input signalsfrom the external input terminal cannot berecorded while it is connected with the USBcable.≥While pictures are input from the DV terminal,the operation icon blinks on instead ofappearing from the side of the screen when youpress the centre of the joy stick.≥While pictures are input from the DV terminal,the TV aspect will not change even if youchange the setting for [TV ASPECT] in the[SETUP] menu.Audio dubbingYou can add music or narration to the recordedcassette.(Audio dubbing can only be performed byusing the remote control.)≥Set to Tape Playback Mode.1 When using an external microphone,securely insert the plug into the [REMOTE/MIC] terminal.2 Find a scene that you want to add sound to,and press the [;] button on the remotecontrol.3 Press the [AUDIO DUB] button on theremote control to make audio dubbingready.4 Press the [;] button on the remote controlto start audio dubbing.≥Be sure that the sound is directed towardseither the external microphone or the built-inmicrophone.5 Press the [;] button on the remote controlto stop audio dubbing.≥If a tape has a non-recorded portion when thetape is dubbed, images and sounds may bedisturbed when this portion of the tape is playedback.ª Before recording with audio dubbing≥Set to Tape Recording Mode.≥When you want to preserve the original soundtaken during recording, set [ADVANCED] >>[AUDIO REC] >> [12bit] to take pictures. (Whenset [16bit], the sounds taken during recordingare erased after recording with audio dubbing.)≥Set [BASIC] >> [REC SPEED] >> [SP] to takepictures.ª To play back the sound recorded withaudio dubbingYou can switch between the sound recorded withaudio dubbing and the original sound.Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].[ST1]: It only plays back the original sound.[ST2]: It only plays back the sound added byaudio dubbing.[MIX]: It simultaneously plays back the originalsound and the sound added with audiodubbing.≥During audio dubbing, it is automatically set to[ST2].REMOTE/MIC;A.DUB ;A.DUB ¥