Panasonic k-nl304g User Manual

Also see for k-nl308k: Basic setup / operation guide User manual Quick start guide

Contents

Panasonic k-nl304g User Manual Manual pdf 59 page image

514.7.3.2 Motion Detect Snapshota) From Main menu->SETTING->REMOTE->ENCODE->Snapshot, you can go to snapshotinterface. See Figure 4-53.b) In Figure 4-53, select trigger snapshot from the dropdown list and then set picture size, qualityand snapshot frequency. Click OK button to save current setup.c) From Main menu->SETTING->EVENT->DETECT, here you can select motion detect type,motion detect channel and then check the enable box. Please refer to chapter 4.7.3.1.d) Click OK button to complete motion detect setup.Figure 4-534.7.4 Alarm Record/Snapshot4.7.4.1 Alarm Recorda) Before you set alarm setup information, please go to chapter 1 to connect alarm input andalarm output cable (such as light, siren and etc).b) The record priority is: Alarm>Motion detect>Regular.In the main menu, from SETTING->EVENT-> ALARM, you can see alarm setup interface. See Figure4-54. Alarm in: Here is for you to select channel number. Event type: There are four types. Local input/network input/IPC external/IPC offline alarm. Local input alarm: The alarm signal system detects from the alarm input port. Network input alarm: It is the alarm signal from the network. IPC external alarm: It is the on-off alarm signal from the front-end device and can activate thelocal NVR. IPC offline alarm: Once you select this item, system can generate an alarm when the front-endIPC disconnects with the local NVR. The alarm can activate record, PTZ, snapshot and etc. Thealarm can last until the IPC and the NVR connection resumes.