66Figure 4-67 Export: Please connect the peripheral device first and then go to the following interface. ClickExport button, you can see there is a corresponding “Config_Time” folder. Double click the folder,you can view some backup files. Import: Here you can import the configuration files from the peripheral device to current device. Youneed to select a folder first. You can see a dialogue box asking you to select a folder if you areselecting a file. System pops up a dialogue box if there is no configuration file under current folder.After successfully import, system needs to reboot to activate new setup. Format: Click Format button, system pops up a dialogue box for you to confirm current operation.System begins format process after you click the OK button.Note: System cannot open config backup interface again if there is backup operation in the process. System refreshes device when you go to the config backup every time and set current directory asthe root directory of the peripheral device. If you go to the configuration backup interface first and then insert the peripheral device, please clickRefresh button to see the newly added device.4.9.3 Backup Loga) From Main menu->INFO->LOG, the interface is shown as below. See Figure 4-68.
