- 42 -= Note =● Display the image (TV, external input, etc.) full-screen to use this functioncompletely.● Aspect mode can be memorised separately for SD (Standard definition)and HD (High definition) signals.● Aspect cannot be changed in teletext service and 3D format signals.Aspect Control SignalProgrammes usually contain an “Aspect Control Signal” (Widescreen signal,Control signal through SCART / HDMI terminal).In Auto mode, aspect mode will appear in the top left of the screen if aWidescreen signal (WSS) or a Control signal through SCART (pin8) / HDMIterminal is found. The aspect will switch to the appropriate ratio.Watching For best picture Aspect■ Available conditions● Terrestrial terminal (WSS only)Valid input signal format:DVBPAL IInvalid input signal format:PAL 525/60 6.0 MHzM.NTSC 6.0 MHz● Satellite terminal (WSS only)Valid input signal format:freesat, Other Sat. / Satellite● AV1 (SCART) / AV2 (VIDEO) terminalsValid input signal format:PALPAL 525/60M.NTSCNTSC: Control signal through SCART (pin 8) / HDMI terminal only
