- 53 -Timer ProgrammingThe Timer Programming menu allows you to choose programmes that youwant to remind watching or record to the USB HDD. At the correct time, theTV will tune to the correct channel even if the TV is in Standby mode.1. Select the forthcoming programme or channel with / / / andpress OK to access2. Select USB HDD Rec. / Reminder with / and press OK to set● To check / change / cancel a timer programming eventRecording Timer Programming Editing timer programming● LED will turn to orange in Standby mode if Timer Programming is set.● To return to TV GuideBACK/RETURN● If you select the current programme, a confirmation screen askingwhether you want to watch or record the programme appears. SelectTimer Programming with / and press OK to set USB HDD Rec. torecord from the time you finish the timer programming event setting.● is displayed on the TV Guide screen if Timer Programming is setfrom TV Guide.● If a programme exists in both HD and SD broadcast, the Timer Optionsscreen will be displayed. Select HD or SD broadcast with / andpress OK to set. will be displayed if HD broadcast is set.= Note =● For freesat and DVB mode● Timer Programming only works reliably if correct time information isreceived via the signal from the broadcaster or service provider.● Depending on the progress of recording, analogue channel may not beselected.● When recording programmes to the USB HDD, be sure to format the USBHDD and enable it to record in USB Device Setup.Recording USB HDD setup
