Pantech S100 User Manual

Contents

Pantech S100 User Manual Manual pdf 41 page image

41• Delete: Deletes the template.SettingsBefore you can send or receive messages using your phone, youmust configure their settings first. This information is normallyprovided by your service provider.Press the [Menu] Soft key then select 1.Messages then select7.Settings and then press the [OK] key.• Text Msg.Before you can send and receive text messages, you must configurethe following settings.Press the [Menu] Soft key then select 1.Messages then select7.Setting and then select 1.Text Msg..• Message Centre: The number of your SMS center, requiredwhen sending a message. You must obtain this number fromyour service provider.• Message Lifetime: The length of time your message is stored atthe message center while attempting to deliver it.• Message Type: The message type: Normal, Fax, Voicemail,ERMES, National Paging, X.400, or Internet. The serviceprovider’s network converts text messages sent from your phoneto the selected format.• Receive to: The location where a text message is stored after itis received. If the storage space of the selected location is full,the message is saved in the other storage location. Press the[Left] or [Right] scroll key to choose either Phone or SIM.• Save Message: Specifies whether the completed message issaved in the Sent Box after it is sent. Press the [Left] or [Right]scroll key to choose either On or Off.• Delivery Report: Specifies whether the network informs youwhether or not your message has been delivered.• Multimedia Msg.Before you can send and receive multimedia messages, you mustconfigure the following settings.Press the [Menu] Soft key then select 1.Messages then select 7.Setting and then select 2.Multimedia Msg..MMS Profile:• Profile Name: Input the profile name.• Home URL: Input the connection URL.• Connection Type: Select WAP or HTTP.GSM Settings• Gateway• IP Address: The IP address. A point is added after every 3 digits.• IP Port: The IP port number.• Login ID: The ID used to sign in to the gateway.• Password: The password used to sign in to the gateway.• Data Call Type: Press the [Left or [Right] scroll key to chooseeither ISDN or Analog.• Dial Number: The dial number.• Login ID: The ID to sign in via GSM.• Password: The password used to sign in via GSM.GPRS Settings