Pantech X1 Getting Started

H BLUETOOTHBluetooth technology connectivity enables wire-less connections between electronic devices. Ifconnected with a Bluetooth Handsfree device, youcan use your phone more freely. With DUN, youcan also use the phone as a wireless modem. It canalso be used to connect wirelessly to products thatuse Bluetooth wireless technology, such as comput-ers. You can synchronize your phone and your PCusing Bluetooth connectivity. Since devices withBluetooth connectivity communicate using radiowaves, your phone and the other device do notneed to be in direct line-of-sight. The two devicesonly need to be within 10 meters (30 feet) of eachother. The connection can be subject to interfer-ence from obstructions such as walls or otherelectronic devices. This device is compliant withBluetooth specification 1.1, supporting the follow-ing profiles: HSP V1.1 (headset profile), HFP V1.0(handsfree car kit profile), DUN V1.1 (dial-upnet-working), GAP (general access profile) and SPPV1.1 (serial port profile). To ensure interoperabilitybetween other devices supporting Bluetooth tech-nology, use UTStarcom approved enhancementsfor this model. Check with the manufacturers ofother devices to determine their compatibilitywith this phone. There may be restrictions onusing Bluetooth technology in some locations.Check with your local authorities or Verizon. Ifyou want more information on this function, visitthe Bluetooth Technology organization Web site:https://www.bluetooth.org/.To access the Bluetooth menu1. In standby mode, press Menu > Tools&Settings> Bluetooth.To activate BluetoothThe Power feature allows you to turn the Bluetoothfunction on and off.1. In standby mode, press Menu > Tools&Settings> Bluetooth.2. Press On/Off.Off.OffTo add a devicePairing is the process that allows the handset to locate,establish and register 1-to-1 connection with the targetdevice.1. In standby mode, press Menu > Tools&Settings> Bluetooth > New Device > OK.Note:If Bluetooth is set to off, “Turn Bluetooth power on?” willappear. Press Yes > OK.2. Instructions (Place device you are connectingto in discoverable mode) will be displayed.Highlight the device and press OK.3. The handset will prompt you for the passkey.Consult the Bluetooth accessory instructionsfor the appropriate passkey (typically “0000”- 4 zeroes).4. Enter the passkey and press OK.48 Connectivity Connectivity 49Note:The default PIN code may differ depending on Bluetoothdevices. Please refer to the user guide of the Bluetoothdevice that you wish to use.5. Once pairing is successful, select Yes and pressOK to connect with the device.6. Once paired, you will see the device listed inthe “New Device” menu.To set the discovery mode1. In standby mode, press Menu > Tools&Settings> Bluetooth > Options > Discovery Mode.2. Select On or Off >Off >Off Select.To name the phone1. In standby mode, press Menu > Tools&Settings> Bluetooth > Options > My Phone Name.To set the supported profiles1. In standby mode, press Menu > Tools&Settings> Bluetooth > Options > Supported Profiles.2. Select Headset,Headset,Headset Handsfree or Contacts access> Select.To removing a device from the paired list1. In standby mode, press Menu > Tools&Settings> Bluetooth > Select device > Options > RemoveDevice.To renaming the paired device1. In standby mode, press Menu > Tools&Settings> Bluetooth > Select device > Options >Rename Device.To reviewing information about the paireddevice1. In standby mode, press Menu > Tools&Settings> Bluetooth > Select device > Options > DeviceInfo.To call using hands-free1. Press the button once to call the last person.To receive a call using hands-free1. Press the button once to receive the call.