Pantum M6200 User Manual

Also see for M6200 series: User guide User guide

Contents

Pantum M6200 User Manual Manual pdf 89 page image

10-210. ScanThis printer provides two types of scan: "Push Scan", which means scanning through theprinter’s Control Panel operations; "Pull Scan" which means scanning through PC terminalscanning the application.10.1. Push Scan10.1.1. Steps for Push Scan with TabletThis section introduces how to scan documents to the PC (only through USB cableconnection) with control panel of the printer. The specific operation steps are as follows:1) Put the document face down on the glass platen.M6200/M6500 Series M6550/M6600 SeriesNote: • During copying, please do not open the cover to avoid any adverse impact on theimage quality.• For the information on "Steps of Using Paper and Manuscript", please refer toChapter 2.5.2) Press Scan on the Control Panel and press direction pad "▲" or "▼" to select "Single PageScan" or "Merge Scan" to enter into the Scan mode.Note: • For the information on Single Page Scan and Merge Scan, see 10.1.3. and10.1.4.3) Press "Start" button to start scanning.Note: • Formats of scanned attachments: network scan supports PDF, TIFF andJPEG formats. Users can select the Save As Type on the panel for the scanneddocuments.10.1.2. Steps for Push Scan with Automatic Document Feeder(ADF)(For M6550/M6600 Series models only)1) For information about Manuscript Loading Procedures, see 2.5.2) Press Scan on the Control Panel and press direction pad "▲" or "▼" to select Single PageScan or Merge Scan to enter into the Scan mode.3) Press Start button to start scanning.4) Paper comes out from the ADF output exit and the scan completes;