FIGURE 11STEP 11:15• SECURELY assemble the two PAD SUPPORTS (3) to the CARRIAGE (16) as shown in FIGURE 11 using two 1/2 X 3-1/4”BOLTS (41), four 1/2” WASHERS (32), and two 1/2” LOCK NUTS (33).• SECURELY assemble two SHOULDER PADS (17) to the PAD SUPPORTS (3) on the CARRIAGE (16) as shown in FIGURE 11 usingfour 3/8 X 3” BOLTS (37), four 3/8” LOCK WASHERS (30), and four 3/8” WASHERS (29). (NOTE: THAT HOLES IN PADS AREOFF-SET TO ONE SIDE)41 1/2 X 3-1/4”3/8 X 3” 373329 261732303 SURFACE TO BE EVEN

ParaBody Hip Sled System User Manual