4. Configuration4-36 March 2001 3160-A2-GB24-104. The Start At screen displays the configuration option used to select thestarting DS0 channel. If the destination selected is the network interface, thenthe network channels appear on the screen. If the destination selected is theDTE Drop/Insert (DSX-1) interface, then these channels appear on thescreen.The following screen shows an example for the network interface. Use theor key to scroll the desired channel onto the screen. Use the Functionkeys to select the starting channel. Only those DS0 channel numbers thatprovide enough bandwidth (based on the configured data rate) to be used as astarting channel number are displayed. Channel allocation for this port canonly be cleared by selecting Clear.Individual Channel Assignment MethodThe Assign By configuration option screen appears after you select a port.ProcedureTo assign by the individual channel method:1. Press the key once to bring the Chan selection onto the screen.2. Press F3 (Chan).3. Press F1 (Next) to display the next configuration option (channel allocation).F1 F2 F3Start At:ClearNext Clear N1F1 F2 F3Assign By:BlockNext Block ACAMIF1 F2 F3Assign By:ChanBlock ACAMI Chan
