Paradyne 3360 User Manual

Also see for ACCULINK 3360: Quick installation Operator's guide Operator's guide

Paradyne 3360 User Manual Manual pdf 84 page image

ACCULINK 336x E1 NTU4-24 June 1996 3360-A2-GB20-104. From the Patterns Abort screen, press the desiredFunction key to abort either All active testpatterns, active Send test patterns, or the activeMonitor (Mon) test pattern.F1Patterns: AbortAll Send MonF2 F3If you select All, the E1 NTU terminates all activetest patterns and displays the message CommandComplete. Skip Step 5.NOTEBe careful when selecting a specifictest pattern to abort. If you mistakenlychoose to abort a test pattern that isnot currently running, a CommandComplete message still displays andthe test pattern currently active stillruns. You can use the TStat branch ofthe menu to view the test status todetermine if the abort was successful.5. From the Abort screen, press the Function key thatcorresponds to the network or port for which youwant to abort a test pattern. Use the scroll keys, ifnecessary.F1Abort:Send or MonNET Prt1 Prt2F2 F3The E1 NTU terminates the selected test patternand displays the message Command Complete.Lamp TestUse the Lamp Test commands to start and stop a test ofthe E1 NTU front panel LCD and LEDs.Starting a Lamp TestTo start a Lamp test,1. From the top-level menu screen, select Test.2. From the Test screen, press the key until theLamp selection appears on the screen.F1Test:Rlpbk Lpbk PtrnsF2 F33. From the Test screen, select Lamp.F1Test:Lpbk Ptrns LampF2 F34. From the Lamp Test screen, select Start.F1Lamp Test:Abort StartF2 F3