Paradyne 7110 SNMP T1 Benefits

Also see for 7110: Quick installation Safety Notice User guide

Contents

specifications

DSU-7110-2-0897For additional information on this or any Paradyne product or service, contact the office nearest you. Or, dial toll-free (USA)800 PARADYNE or call 813 530-8623. Fax (USA) 813 530-8216.Toronto 905 709-5000 fax: 905 709-3469 Montreal 514 288-0001 fax: 514 288-1246Europe 44-1-753-515000 fax: 44-1-753-550011 Japan 81 3-5541-6630 fax: 81 3-5541-6631Hong Kong 852 2543-0083 fax: 852 2541-3767 Latin America 813 530-8358 fax: 813 532-5240Singapore 65 355-5230 fax: 65 355-5244 Visit the Paradyne Power Pages at http://www.paradyne.comSpecifications subject to change without notice. Printed in U.S.A. ©Paradyne Corporation 1997.ACCULINK is a registered trademark of Paradyne Corporation. PARADYNE and Performance Wizard are trademarks of ParadyneCorporation. All other products or services mentioned are the trademarks, service marks, registered trademarks, or registered servicemarks of their respective owners.F E A T U R E S• DIRECT SNMP MANAGEMENT• T1 AND FT1 SUPPORT• SINGLE V.35 DATA PORT• PROVIDES FDL FOR T1 IN-BAND SNMPMANAGEMENT• SUPPORTS Nx56 AND Nx64 KbpsAPPLICATIONS• FRIENDLY ASCII (VT-100) USER INTERFACE• DUAL EIA-232 (DB-25) CONNECTORS FORASCII INTERFACE AND NETWORKMANAGEMENT• SLIP OR PPP MANAGEMENT CONNECTIONPROTOCOL• MIB II AND ENTERPRISE MIB SUPPORT• TELNET• 5-YEAR WARRANTY, RETURN TO FACTORYPORTS AND CONNECTORSThe 7110 provides a single V.35 connector for connection of a router orother data equipment (DTE). The ASCII terminal port can support eithera direct connect ASCII terminal for local setup and diagnostics, or amodem connection for remote access to the terminal port for setupand diagnostics. The management port can be directly connected to anSNMP manager, an ASCII terminal or printer for alarms to be printed,or connected to a router port or external LAN adapter for SNMPmanagement.Terminal/ManagementASCIITerminalor PrinterPOWERNETWORK!PowerV. 35 DTEData PortRouter Port,LAN Adapteror ModemororUser DataPortsNetworkNMS HostTerminal ModemorDTE7110 SPECIFICATIONSApprovalsFCC Part 15: Class A digital deviceFCC Part 68: Refer to the equipment’s label for RegistrationNumberListed UL 1950Certified CSA 1080.0 M1983Safety: Certified Component CSA 22.2, No. 950-M93Emissions Class A digital apparatusClock SourcesT1 network interface, port, or internal clockEnvironmentOperating Temperature: 32° to 122° F (0° to 50° C)Storage Temperature: -4° to 158° F (-20° to 70° C)Relative Humidity: 5% - 95% (non-condensing)Shock and Vibration: Withstands normal shipping andhandlingNetwork T1 InterfacePhysical Interface (USA): RJ48CPhysical Interface (Canada): CA81A using adapter cable(Optional feature 3100-F1-501)Framing Format: D4, ESFCoding Format: AMI, B8ZSLine Build-Out (LBO): 0.0 dB, -7.5 dB, -22.5 dBANSI PRM: SelectableBit Stuffing: FCC Part 68, AT&T TR 62411LoopbacksStandard: AT&T TR 54016, AT&T TR 62411,ANSI T1.403.1989Additional: LLB (Line Loopback), PLB (Payload Loopback),RLB (Repeater Loopback), DTLB (Data Terminal Loopback),DCLB (Data Channel Loopback), V.54 Loop 2 and Loop 3,ANSI T1.403 Annex B Fractional T1 LoopbackFront Panel IndicatorsSystem LEDs:OK = Normal OperationFAIL = Fault in DSUTEST = Test in ProgressNetwork LEDs:SIG = Signal PresentOOF = Out of FrameALARM = Alarm ConditionEER = Excessive Error RatePort LEDs:TXD = Transmit DataRXD = Receive DataRTS = Request To SendCTS = Clear To SendDTR = Data Terminal ReadyNMS CompatibilitySNMP Network ManagerIP ConnectivityUp to 20 routesMIB II Object Groups SupportedI. ICMP groupII. Interfaces group:• T1 network• DTE Data port• Terminal port• Management portIII. IP groupIV. SNMP groupV. System groupVI. TCP groupVII. Transmission group:• T1 network - DS1/E1 MIB• DTE Data port - RS-232-like MIB• Terminal port - RS-232-like MIB• Management port -RS-232-like MIBVIII. UDP groupDTE Port InterfaceStandards: 34-pin connector (socket) ITU V.35 (ISO 2593)Rates: Nx64: 64 Kbps - 1.536 MbpsNx56: 56 Kbps - 1.344 MbpsManagement Port25-pin DB-25 connector (socket)EIA-232 / ITU V.24 (ISO 2110)Management Port Data Rates9.6, 14.4, 19.2, 28.8, and 38.4 KbpsSynchronous/Asynchronous2.4, 4.8 asynchronous onlyTerminal Port25-pin DB-25 connector (socket)EIA-232 / ITU V.24 (ISO 2110)Terminal Port Data Rates2.4, 4.8, 9.6, 14.4, 19.2, 28.8, and 38.4 KbpsAsync TerminalANSI X3.64/VT-100 compatibilityData Rate: 2.4, 4.8, 9.6 (Default), 14.4, 19.2, 28.8, and38.4 Kbps8 bits per character, 1 stop bit, no parityHousingHeight: 2.13” (54.1mm)Width: 9.14” (231.2mm)Depth (case): 6.15” (157.5mm)Depth (case and connectors): 6.51” (164.3mm)Power Consumption and Dissipation4.5 watts, 15.4 BTU/hr. at 120V ACPower Requirements120V AC ± 12V AC60 Hz ± 3 Hz

/ 2

Related manuals for Paradyne 7110