Paradyne Hotwire 8774 User Manual

Also see for Hotwire 8774: Installation instructions User guide

Contents

IndexIN-2 February 2001 8774-A2-GB20-40Ddeleting a login ID, 7-3DeviceFailedself-test result, 4-5status message, 4-3messages, 6-3name, 3-2Tests, 5-8dimensions, D-1Disconnect Time, for Telnet session, A-12Display LEDs, 4-13documents, related, viDOS, TFTP server on, 3-6DownloadCode screen, 3-8Failed, status message, 4-3downloading a configuration, 3-6DSLFailed, self-test result, 4-5Line Rate, A-3Mode, A-9Port LEDs, 4-14DSLAMdefined, 1-2exiting from session, 2-9login, 2-2DSX-1Failed self-test results, 4-5Interface Options, A-4–A-5Excessive Error Rate Threshold, A-6LEDs, 4-14Performance Statistics, 4-11DTEconnector pin assignments, C-2Loopback, 5-5EEER (Excessive Error Rate) status message, 4-3effective access level, 7-1endingan ATI session, 2-9tests, 5-9Enterprise Specific Traps, B-3environment requirements, D-1errormessages (line 24), 6-3statistics, 4-6Excessive Error Rate (EER) Threshold, A-2, A-6Ffactory defaults, 3-3–3-4Failure, self-test result, 4-5features, 1-2front panel LEDs, 4-14function keys, 2-7and message area, 2-5GGeneral SNMP Management, assigning access, 7-4HHealth and Status messages, 4-3IIdentity, 3-2IMC, defined, 1-2Inactivity Timeout, Telnet session, A-11intended audience, vIP addressDSL peer, A-3example, 8-2selecting, 8-1SNMP manager, 7-4, A-15IP Conservative, IP addressing depends upon, 8-1IP Validation, NMS, A-15Kkeysfunction, 2-7keyboard, 2-6Llamp test, 5-8active, test status, 4-5LEDsDisplay, 4-13front panel, 4-14lamp test, 5-8testing, 5-8LineCoding format, A-5Equalization, A-5Framing, A-5Loopback (LLB), 5-3link-layer protocols, 8-1linkUp and linkDown traps, B-2local Line Loopback (LLB), 5-3LOF (Loss Of Frame) status message, 4-3loginDSLAM, 2-2