Paradyne Hotwire 8774 User Manual

Also see for Hotwire 8774: Installation instructions User guide

Contents

IndexIN-4 February 2001 8774-A2-GB20-40Rrateauto, A-3DSL line, A-3related documents, viRemoteSend Line Loopback, 5-6Telco Line Loopback, A-9Repeater Loopback (RLB), 5-4resettingthe ATI and slot, 3-7the AutoRate feature, 3-11the unit from the Control menu, 3-12restoring access to the ATI, 3-4, 3-11Ssaving configuration options, 3-7screen area, 2-5security, 7-1self-test results, 4-5SendAIS on Network Failure, A-6and Monitor 511, 5-7Remote Line Loopback, 5-6size of card, D-1SNMPGeneral SNMP Management Options, A-13Managementcapabilities, 1-4enable/disable, A-13limiting access, 7-4NMS Security, 7-4Options, A-15system identity information, 3-2Trapsconfiguring, 6-2enable/disable, A-17Options, A-16trapsstandards compliance, B-1starting an ATI session, 2-2start-up, 2-1statusDSX-1 port, A-5test messages, 4-5Status menuDisplay LEDs, 4-13Performance StatisticsCurrent Network, 4-10DSX-1, 4-11Network, 4-8Network Error, 4-6System and Test, 4-2Health and Status, 4-3Self-Test Results, 4-5Test Status, 4-5Systemdevice name field, 3-2Identity information, 3-2LEDs, 4-14Options, A-9Ttechnical specifications, D-1TelcoInitiatedLine Loopback, 5-10Loopback, A-9Payload Loopback, 5-10Remote Line Loopback, 5-11Remote Line Loopback, A-9Telnet SessionAccess Level, A-11access requirement, 7-1configuration options, A-10Disconnect Time (Minutes), A-12enable/disable, A-11Inactivity Timeout, A-11Login Required, A-11terminal port, direct connection, 2-1testAbort All, 5-1aborting, 5-9accessing menu, 5-1active statuses, 4-5Device Tests, 5-8DTE Loopback, 5-5ending a, 5-9lamp, 5-8LED, 4-14Line Loopback, 5-3menu, 5-1pattern, 5-7procedures, 5-1Remote Send Line Loopback, 5-6Repeater Loopback, 5-4Send and Monitor 511, 5-7status messages, 4-5Telco-initiated, 5-10Test Duration, A-9Test Timeout, A-9ThresholdExcessive Error Rate, A-2, A-6Margin, A-2time slots, relative to payload rate, 4-9timeout

/ 110

Related manuals for Paradyne Hotwire 8774