Paradyne iMarc SLV Operation Manual

Also see for FrameSaver SLV 9126: Installation instructions Installation instructions

Contents

3. Status and Statistics9000-A2-GB33-20 May 2003 3-21General, continuedModels 9783 and 9788 CSU/DSUs and Routers:ATM Mode ATM Status ON – ATM is up.Network1Model 9720:OK Network Status ON – The IDSL network interface is operational.OFF – The IDSL network interface is not operational.Models 9520, 9520-ILM, 9820-45M:TD Transmit Data ON – At least one non-idle cell was transmitted to thenetwork during the sampling period.OFF – No non-idle cell was transmitted to the networkduring the sampling period.RD Receive Data ON – At least one non-idle cell was received from thenetwork during the sampling period.OFF – No non-idle cell was received from the networkduring the sampling period.Models 9520, 9520-ILM, 9720, 9820-45M:LMI OK LMI Status ON – LMI is operating successfully on the frame relaylink.OFF – LMI is not operating successfully.Models 9520, 9520-ILM:OOF Out Of Frame ON – At least one OOF error was detected on thenetwork during the sampling period.OFF – No OOF error was detected on the networkduring the sampling period.LOS Loss Of Signal ON – An LOS error was detected on the network duringthe sampling period.OFF – No LOS error was detected on the networkduring the sampling period.AIS Alarm IndicationSignalON – An AIS was received during the sampling period.OFF – No AIS was received during the sampling period.YEL Yellow Alarm ON – A Yellow Alarm condition existed during thesampling period (meaning that the far-end equipmentreported an OOF or LOF error).OFF – No Yellow Alarm condition was detected duringthe sampling period.Table 3-3. Display LEDs and Control Leads Screen Labels (2 of 4)Label Indication What It Means