Contents - Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- about this guide
- conventions used
- Logging In
- Main Menu
- Screen Work Areas
- Navigating the Screens
- Function Keys
- Selecting an Entry from a Menu
- Selecting a Field
- Navigating the Router's CLI
- Limiting Access
- Limiting Dial-In Access via the Modem Port
- Controlling ISDN Access
- Controlling Telnet or FTP Access
- Limiting FTP Access
- TS Access Management Link
- Controlling SNMP Access
- Assigning SNMP Community Names and Access Levels
- Limiting SNMP Access Through IP Addresses
- Creating a Login
- Modifying a Login
- Controlling Router CLI Access
- Changing Access Levels
- status and statistics
- Displaying System Information
- Viewing LEDs and Control Leads
- LED Descriptions
- Power Module LEDs (Models 9520, 9520-ILM, 9820-45M)
- Display LEDs and Control Leads Screen Descriptions
- Device Messages
- Status Information
- System and Test Status Messages
- Network LMI-Reported DLCIs Status
- IP Path Connection Status
- PVC Connection Status
- Time Slot Assignment Status
- DBM Interface Status
- IP Routing Table
- Performance Statistics
- Clearing Performance Statistics
- Service Level Verification Performance Statistics
- DLCI Performance Statistics
- Additional Performance Statistics for IP Enabled DLCI
- Frame Relay Performance Statistics
- PPP Performance Statistics
- ATM Performance Statistics (9783, 9788)
- VCC Performance Statistics (9783, 9788)
- ESF Line Performance Statistics (9123, 9126, 9128)
- DDS Line Performance Statistics (9623, 9626)
- T3 Network Line Performance Statistics (9520, 9520-ILM)
- SHDSL Line Performance Statistics (9788)
- DBM Call Performance Statistics
- Ethernet Performance Statistics
- Trap Event Log
- operation and maintenance
- Modem Operation
- Manually Disconnecting the Modem
- ISDN DBM Operation
- Placing a Test Call (Nondisruptive)
- Verifying ISDN Lines
- FTP File Transfers
- Upgrading System Software
- Upgrading ISDN BRI DBM Software
- Determining Whether a Download Is Completed
- Transferring Collected Data
- Turning Off the System Alarm Relay
- Hardware Maintenance for Models 9520, 9520-ILM, and 9820-45M
- Replacing the Front Panel Assembly
- Replacing a Power Module
- troubleshooting
- Problem Indicators
- Resetting the Unit and Restoring Communication
- Restoring Communication with an Improperly Configured Unit
- Troubleshooting Management Link Feature
- Viewing Captured Packets from the Menu-Driven User Interface
- Alarms
- Viewing the Trap Event Log
- Frame Relay PVC Problems
- ISDN DBM Problems
- Tests Available
- Test Timeout Feature
- Starting and Stopping a Test
- Aborting All Tests
- PVC Tests
- PVC Loopback
- Send Pattern
- Connectivity
- Network ATM Loopback (9783, 9788)
- Physical Tests (9123, 9126, 9128)
- Line Loopback (9123, 9126, 9128)
- Payload Loopback (9123, 9126, 9128)
- Repeater Loopback (9123, 9126, 9128)
- DTE Loopback (9123, 9126, 9128)
- Send Line Loopback (9123, 9126, 9128)
- Send Remote Line Loopback (9123, 9126, 9128)
- Send and Monitor Pattern Tests (9123, 9126, 9128)
- Physical Tests (9520, 9520-ILM)
- Line Loopback (Network or 9520-ILM T3 User Port)
- DTE Loopback (9520 Data Port)
- Physical Tests (9623, 9626)
- CSU (External) Network Loopback (9623, 9626)
- Latching Loopback (9623, 9626)
- Monitor 511 (9623, 9626)
- Physical Tests (9720, 9783, 9788 CSU/DSUs)
- Physical Tests (9820-2M, 9820-8M, 9820-45M)
- IP Ping Test
- IP Ping Test – Procedure 1
- IP Ping Test – Procedure 2
- Telnet
|
3. Status and Statistics3-56 May 2003 9000-A2-GB33-20Invalid TransitNetwork Selection91 Incorrect format of transitnetwork identification.Contact your servicerepresentative.MandatoryInformation ElementMissing96 Required data is missingfrom a mandatoryinformation element.Contact your servicerepresentative.Message NotCompatible with CallState101 Device sending this causehas received a messagethat is not permissible whilein the call state.Contact your servicerepresentative.Msg Nonexistent 98 An unexpected messagewas received in a stateother than Null.Retry the call.Msg TypeNonexistent orUnimplemented97 Device sending this causehas received a nonexistentor not implementedmessage type while in thecall state.Device sending this causehas received a statusmessage that indicates anincompatible call state.Contact your servicerepresentative.Network Out ofOrder38 Network is not functioningcorrectly, and the conditionis expected to continue.Contact your servicerepresentative.No Call Suspended 85 A call resume has beenissued, but no calls havebeen suspended.No action is needed.No Circuit/ChannelAvailable34 No circuit/channel iscurrently available to handlethe call.Wait and try again.No DestinationRoute3 Network through which callhas been routed does notserve the destination areaor device.Contact your servicerepresentative.None — No causes have beengenerated.No action is needed.Non-selected UserClearing26 User has not been awardedthe incoming call.No action is needed.No Route to SpecifyTransit Network2 The device sending orreceiving this cause doesnot recognize the transitnetwork that the call isbeing/has been routedthrough.1. Verify that the networkexists.2. Verify that the networkserves the devicesending the cause.Table 3-12. Most Recent and Previous Cause Value Messages (3 of 6)MessageCauseNo. What It Indicates What To Do PreviousNext |