24Network Camera User Manual IP Address Conflict1. Go to ConfigAlarmAnomalyIP Address Collision as shown below.2. Enable alarm and set alarm holding time.3. Trigger alarm out. When the IP address of the camera is in conflict with the IP address ofother devices, the system will trigger the alarm out. Cable Disconnection1. Go to ConfigAlarmAnomalyCable Disconnected as shown below.2. Enable alarm and set alarm holding time.3. Trigger alarm out. When the camera is disconnected, the system will trigger the alarm out.4.4.3 Alarm InThis function is only available for some models. To set sensor alarm (alarm in):Go to ConfigAlarmAlarm In interface as shown below.