Paramont PAR 4MP Series User Manual
Also see for PAR 4MP Series: User manual
                                                                             | |
Contents
| 
43Network Camera User ManualHTTP Port: The default HTTP port is 80. It can be changed to any port which is notoccupied.Data Port: The default data port is 9008. Please change it as required.RTSP Port: The default port is 554. Please change it as required.4.6.3 Server ConfigurationThis function is mainly used for connecting network video management system.1. Check “Enable”.2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Thenenable the auto report in the ECMS/NVMS when adding a new device. Next, input theremaining information of the device in the ECMS/NVMS. After that, the system willautomatically allot a device ID. Please check it in the ECMS/NVMS.3. Input the above-mentioned server address, server port and device ID in the correspondingboxes. Click “Save” button to save the settings.4.6.4 DDNSIf your camera is set to use PPPoE as its default network connection, DDNS should be set fornetwork access. Before you set the DDNS, please make sure you have registered a domainname on the DDNS server.1. Go to ConfigNetwork DDNS.2. Apply for a domain name. Take www.dvrdyndns.com for example. |
Related manuals for Paramont PAR 4MP Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine