Parker 10G-11-0015 Product Manual
Also see for AC10 series: Product manualQuick start guideProduct manualEasy start guideProduct manual
                                                                                                                                                       | |
Contents
| 
9-40 Function ParametersAC10 InverterF754 Zero-current threshold (%) Setting range: 0~200 Mfr’s value: 5F755 Duration time of zero-current (s) Setting range: 0~60 Mfr’s value: 0.5When the output current has fallen to zero-current threshold, and after the duration time ofzero-current, ON signal is output.9.8 Motor ParametersF800 Motor’s parameters tuningSetting range:0: Disabled;1: Rotating tuning;2: Stationary tuningMfr’s value: 0F801 Rated power (kW) Setting range: 0.75～1000F802 Rated voltage (V) Setting range: 1～440F803 Rated current (A) Setting range: 0.1～6500F804 Number of motor poles Setting range: 2～100 4F805 Rated rotary speed (rpm/min) Setting range: 1～30000F810 Motor rated frequency (Hz) Setting range: 1.0~590.0 50.00Set the parameters in accordance with those indicated on the nameplate of the motor.Good control performance of vector control requires accurate parameters of the motor.(Accurate parameter tuning requires correct setting of rated parameters of the motor.)In order to get excellent control performance, configure the motor in accordance withadaptable motor of the inverter. In the case of too large difference between the actual power ofthe motor and that of adaptable motor for inverter, the inverter’s control performance willdecrease remarkably.F800＝0, parameter tuning is invalid. But it is still necessary to set the parametersF801~F803，F805 and F810 correctly according to those indicated on the nameplate of themotor.After being powered on, it will use default parameters of the motor (see the values of F806-F809) according to the motor power set in F801. This value is only a reference value in view ofY series 4-pole asynchronous motor.F800＝1, rotating tuning.In order to ensure dynamic control performance of the inverter, select “rotating tuning” afterensuring that the motor is disconnected from the load. Set F801-805 and F810 correctly prior torunning the rotating autotune.Press the “I” key on the keypad to display “TEST”, and the inverter will tune the motor’sparameter in two stages. After that, the motor will accelerate according to acceleration time setat F114 and maintain it for a certain period. The motor will then decelerate to 0 according tothe time set at F115. After auto-checking is completed, relevant parameters of the motor will bestored in function codes F806~F809, and F800 will be automatically set back to 0.F800＝2, stationary tuning.In some cases it may be impossible to disconnect the motor from the load.Press the “I” key, and the inverter will display “TEST”, and the inverter will tune the motor‘sparameter in two stages. The motor’s stator resistance, rotor resistance and leakageinductance will be stored in F806-F809 automatically (the motor’s mutual inductance usesdefault value generated according to the power), and F800 will be automatically set back to 0.The user may also calculate and input the motor’s mutual inductance value manuallyaccording to actual motor data. With regard to calculation formula and method, contact Parkerfor consultation. |
Related manuals for Parker AC10 series
This manual is suitable for:
AC10 series10G-11-0015 Series10G-11-0025 Series10G-11-0035 Series10G-11-0045 Series10G-12-0100 Series10G-31-0015 Series10G-31-0025 Series10G-31-0035 Series10G-31-0045 Series10G-32-0100 Series10G-35-0300 series10G-35-0400 series10G-41-0006 Series10G-41-0010 Series10G-41-0015 Series10G-410-2650 Series10G-411-3200 Series10G-411-3600 Series10G-42-0020 Series10G-42-0030 Series10G-42-0040 Series10G-42-0065 Series10G-44-0230 Series10G-45-0380 Series10G-45-0440 Series10G-46-0600 Series10G-47-0750 Series10G-47-0900 Series10G-48-1100 Series10G-48-1500 Series10G-49-2200 Series10G-12-0050 Series10G-12-0070 Series10G-32-0050 Series10G-32-0070 Series10G-33-017010G-34-021010G-36-055010G-43-0080 Series10G-43-0090 Series10G-44-012010G-44-0170 Series10G-45-0320 Series10G-49-1800 Series
manualsdatabase
Your AI-powered manual search engine