Parker AC890PX Product Manual

Also see for AC890PX Series: Product manual Quick start manual Engineering Reference User Mounting and Assembly Instructions

Contents

Parker AC890PX Product Manual Manual pdf 48 page image

Installing the Drive 3-27AC890PX AC DriveStep 3: Powering-Up the UnitNOTE Refer to "USER 24V DC INPUTS", page 3-23 for details about configuring and commissioning the drive withoutconnecting 3-phase power supply. Continue reading from "3.3: Configure the AC890PX AC Drive", page 3-28.Main Points1. Complete all Pre-Operation Checks.2. Ensure all the set-up parameter values for each AC890PX AC Drive have been entered. Refer to "Set-up Parameters"page 3-30.3. Autotune the drive where necessary.4. Save your Application.5. Follow one of the Start-up Routines: Local Mode or Remote Mode.3.1: Pre-Operation ChecksBefore Applying Power:Read the Safety section at the front of the Manual. Ensure that all local electric codes are met. Check for damage to equipment. Check for loose ends, clippings, drilling swarf etc. lodged in the drive and system. Check all external wiring circuits of the system - power, control, motor and earth connections. Ensure that unexpected rotation of the motor in either direction will not result in damage, bodily harm or injury.Disconnect the load from the motor shaft, if possible. Check the state of the Motor Thermistor and External Brake Resistor connectors. Check external run contacts areopen. Check external speed setpoints are all at zero. Ensure that nobody is working on another part of the system which will be affected by powering up. Ensure that other equipment will not be adversely affected by powering up. Check motor stator connections are correctly wired for Star or Delta as necessary for drive output voltage.