8 Parker HannifinPump and Motor DivisionTrollhättan, SwedenService ManualSeries F11Bulletin HY30-5503-M1/UKAssembling7. Assemble the round nut and tightenit until one opening is in correct posi-tion for the lock washer.10. Assemble the cylinder barrel.Instructions on page 11.8. Secure the round nut as shown inthe picture.11. Assemble the O-rings on the dis-tance ring.9. Assemble the valve plate. Makesure the slot is in correct position andthe valve plate is located as shown inpicture.12. Carefully tap down the distancering to the barrel housing. Lubricatethem with oil before assembly.

General information

specifications

Design

Operational Check

Assembly

Barrel Retaining Ring

Split view

Parts specification

Valve Plates

Parker F11-5 Service Manual

F11-10

F11-12

F11-14

F11-19

F11-5

F11-6

F12 series