96 InstallationInstruction book, IQAN- XA26 InstallationConnector C1Connector pin assignmentsConnector kit Parker no. 5031063Housing Amp no. 1-963226-1Casing Amp no. 0-965643-1Plane sealing, 42 p installed in modulePin types* Amp no. 963711-2 (MT) Amp no. 929938-1 (JPT)Cables 0,75-1,0 mm² (MT) 1,5-2,5 mm² (JPT)Seals Amp no. 963530-1 (MT) Amp no. 828905-1 (JPT)Plugs (empty pos.) Amp no. 963531-1 (MT) Amp no. 828922 (JPT)IQAN crimping toolreferencesBlue handle, pos. Ause blue extraction toolRed handle, pos. Buse yellow extraction toolIQAN tool kit Parker no. 5031061LogicalSymbolPinNo.(I)nput or(O)utputFunction descriptionand/or Signal name(s)+BAT 28 - Power supply, positive.-BAT 15 - Power supply, negative ground+VREF 42 - Voltage reference for external sensors. Sourcing +5V.-VREF 29 - Voltage reference for external sensors. Return (0V).ADDR-H 1 - High side to address tag. Sourcing +5V.ADDR-L 14 - Low side to address tag. Return (0V).CAN-H 2627--CAN high voltage bus line, will be HIGH in dominant state.CAN-L 4041--CAN low voltage bus line, will be LOW in dominant state.*= The connector contains two types of terminals;MT (Micro Timer) and JPT (Junior Power Timer).42281429151+BAT ADDR-HADDR-LCAN-HCAN-LPORT 1PORT 2-BAT+VREF-VREFPORT 0XA2