Parker MX80L series Product Manual

Also see for MX80L series: Product manual

Contents

Parker MX80L series Product Manual Manual pdf 6 page image

MX80L Series Product Manual Chapter 1 - IntroductionParker Hannifin CorporationDaedal DivisionIrwin, Pennsylvania6Chapter 1 - IntroductionProduct DescriptionMX80L PositionerAlthough the MX80L is small in size and weight, it is large on performance and reliability. All keycomponents are integral to the unit - residing within the body of the stage to provide a clean looking,reliable, unobstructed package. At the heart of the MX80L is an innovative non-contact linear servomotor (patent pending). This direct drive motor has been optimized for force, speed, and acceleration, todeliver outstanding performance and response. A high precision non-contact linear encoder providessub-micron resolution and repeatability. Selectable resolutions range from 10 nanometers to 5 microns.Precision ground “zero cage creep” crossed roller bearing sets provide extremely smooth - precise lineartranslation. Travel limit and home sensors are conveniently designed into the unit for easy adjustmentover the entire travel of the stage. Although there are no moving cables, 1 or 3 meters of hi-flex cablingdepending on configuration option is included and wired directly into the units. This hi-flex cablingaddresses cable flexing concerns associated with the second or third axis in multi-axis system.UnpackingUnpackingCarefully remove the positioner from the shipping container and inspect the unit for any evidence ofshipping damage. Report any damage immediately to your local authorized distributor. Please save theshipping container for damage inspection or future transportation.Incorrect handling of the positioner may adversely affect the performance of the unit in its application.Please observe the following guidelines for handling and mounting of your new positioner.• DO NOT allow the positioner to drop onto the mounting surface. Dropping the positioner cangenerate impact loads that may result in flat spots on bearing surfaces or misalignment of drivecomponents.• DO NOT drill holes into the positioner. Drilling holes into the positioner can generate particles andmachining forces that may effect the operation of the positioner. Daedal will drill holes ifnecessary; contact your local authorized distributor.• DO NOT subject the unit to impact loads such as hammering, riveting, etc. Impacts loadsgenerated by hammering or riveting may result in flat spots on bearing surfaces or misalignment ofdrive components.• DO NOT lift the positioner by cables or cable management system. Lifting positioner by cables orcable management system may effect electrical connections and/or cable management assembly.The unit should be lifted by the base structure only.• DO NOT expose positioner to mist, spray or submersion in liquids.• DO NOT disassemble positioner. Unauthorized adjustments may alter the positioner’sspecifications and void the product warranty.www.comoso.com