Parker MX80L series Product Manual

Also see for MX80L series: Product manual

Contents

Parker MX80L series Product Manual Manual pdf 7 page image

MX80L Series Product Manual Chapter 1 - IntroductionParker Hannifin CorporationDaedal DivisionIrwin, Pennsylvania7Return InformationReturnsAll returns must reference a “Return Material Authorization” (RMA) number. Please call your localauthorized distributor or Daedal Customer Service Department at 800-245-6903 to obtain a “RMA”number. See Daedal Catalog #8083/USA, for additional information on returns and warranty.Repair InformationOut-of-Warranty RepairOur Customer Service Department repairs Out-of-Warranty products. All returns must reference a “RMA”number. Please call your local authorized distributor or Daedal Customer Service Department at 800-245-6903 to obtain a “RMA” number. You will be notified of any cost prior to making the repair.Warnings and PrecautionsHot SurfacesDO NOT touch linear motor coils located in the base of the MX80, (see page 8, Assembly Diagram, forcomponent location), after high duty operation. Motor temperature may approach 125 C. The unit itselfmay become warm or hot to the touch.Electrical ShockDO NOT take apart or touch any internal components of the positioner while unit is plugged into anelectrical outlet. SHUT OFF power before replacing components to avoid electrical shock.High Magnetic FieldUnit may be HAZARDOUS to people with Pace Makers or any other 'magnetically-sensitive' medicaldevices. Unit may have an effect on 'magnetically-sensitive' applications.Ferrous MaterialsThe positioner's open design WILL ATTRACT ferrous materials. The customer must take additionalprecautions in these applications to keep positioner free of these highly magnetic particles.Vertical OperationThe MX80L is NOT recommended for vertical operation unless it is configured with the pneumatic assistoption. If the pneumatic assist is not used, the carriage and customer's load will fall in power losssituations potentially causing product or load damage or personal injury.General SafetyBecause linear motors can accelerate up to 5 g's, and sometimes positioners move without warning,keep all personnel away from dynamic travel range of positioner.www.comoso.com