Parker isysNet ControlNet A Series Installation & Service Instructions Manual
        | |
isysNet ControlNet Adapter, Series A (PSSCCNA) E103P5Wire the ControlNet AdapterFollowing are wiring instructions for the ControlNet Adapter.TNC Cables• Connect TNC cables to Channel A or B for single media.• Connect TNC cables to Channel A and B for redundant media.Make sure all connectors and caps are securely tightened toproperly seal the connections against leaks and maintain IP67requirements.!ATTENTIONMale In ConnectorPSSCCNA Auxiliary Power (Mini 7/8")(view into connector)Pin 1 - User Power +Pin 2 - Adapter Power +Pin 3 - Adapter Power -Pin 4 - User Power -NOTE: User power is the 24VDC power for field devices.Adapter power is the 24VDC power for adapter. It is converted to5VDC to power isysNet modules. |
Related manuals for Parker isysNet ControlNet A Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine