Parker isysNet ControlNet A Series Installation & Service Instructions Manual
        | |
isysNet ControlNet Adapter, Series A (PSSCCNA) E103P7SpecificationsFollowing are specifications for the PSSCCNA ControlNet adapter.ControlNet Adapter - PSSCCNAExpansion I/O Capacity • Maximum of 63 modules• Maximum of 5 Rack Optimized connections (for digital modules only)• Maximum of 25 Direct connections• PSSCCNA backplane current output = 1.0A maximum. See the list below for backplanecurrent consumption for each I/O catalog number and the current consumption for eachof the modules connected to the PSSCCNA. Verify that it is below 1.0A.• Backplane current can be extended beyond 1.0A with a PSSSE24A BackplaneExtension Power Supply. The PSSSE24A can supply up to an additional 1.3A ofbackplane current.• Multiple PSSSE24A modules can be used to reach the maximum of 63 modules.Cat. No. PointBus Current RequirementsPSSN8xxx 75 mAPSSP8xxx 75 mAPSST8xxx 75 mAPSSTR4M12A 90 mAPSSNACM12A 75 mAPSSNAVM12A 75 mAPSSTACM12A 75 mAPSSTAVM12A 75 mAPSSS23A 75 mAPSSV32A 75 mAControlNet Communication Rate 5Mbits /s (fixed value)Power Supply SpecificationsPower Supply Note: In order to comply with CE Low Voltage Directives (LVD), you must use either aNEC Class 2, a Safety Extra Low Voltage (SELV) or a Protected Extra Low Voltage (PELV)power supply to power this adapter. A SELV supply cannot exceed 30V rms, 42.4V peakor 60VDC under normal conditions and under single fault conditions. A PELV supply hasthe same rating and is connected to protected earth.Input Voltage Rating 24VDC10-28.8VDC rangeInrush Current 6A maximum for 10msField Side Power Requirements, Maximum 24VDC (+20% = 28.8VDC) @ 425 mAInterruption Output voltage will stay within specifications when input drops out for10ms at 10V with maximum loadGeneral SpecificationsLED Indicators 1 green/red Adapter status2 green/red ControlNet status1 green/red PointBus status1 green System Power (PointBus 5V power)1 green Adapter Power (24V from field supply)Power Consumption, Maximum 10.2W @ 28.8VDCPower Dissipation, Maximum 5.0W @ 28.8VDCThermal Dissipation, Maximum 16.9 BTU/hr. @ 28.8VDCIsolation Voltage 50V rms(continuous-voltage withstand rating) Tested at 1250VAC for 60sField Power BusNominal Voltage 24VDCSupply Voltage 10-28.8VDC rangeSupply Current 10A maximumDimensions Inches (Millimeters) 4.41H x 2.83W x 2.56D (112H x 72W x 65D) |
Related manuals for Parker isysNet ControlNet A Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine