Parsun F50/60 BWL-D Owner's Manual
                                                                     | |
Contents
| 
18CAUTION· When the engine is cold, it needs to be warmed up.· If the engine does not start on the first try, repeat the procedure. If the engine fails to start after4 or 5 tries:BW Models: open the throttle a small amount (between 1/8 and 1/4), and try again.FW models: open the neutral throttle lever on the remote control box, and try again.NOTE:Never turn the main switch to “START” (start) while the engine is running.Do not keep the starter motor turning for more than 5 seconds. If the starter motor is turnedcontinuously for more than 5 seconds, the battery will be quickly discharged, thus making itimpossible to start the engine. The starter can also be damaged. If the engine will not start after5 seconds of cranking, return the main switch to “ON” (on), wait 10 seconds, and then crank theengine.2.6 Warm up engine1. After starting the engine, place the gear shift lever in neutral. For approximately the first 3 minutesafter starting, warm up the engine by operating at one fifth throttle or less. Otherwise, it will shortenengine life.NOTE:If the choke knob is left pulled out after the engine starts, the engine will stall.In the temperatures of -5℃ or less, leave the choke knob pulled out fully for approximately 30seconds after starting. |
Related manuals for Parsun F50/60 BWL-D
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine