Paton StandardMIG-160 Data Sheet And Operating Manual

Paton StandardMIG-160 Data Sheet And Operating Manual Manual pdf 11 page image

-11 - PATON StandardMIG MMA/TIG/MIG/MAG3. MANUAL METAL ARC WELDING WITH A STICKELECTRODE (MMA WELDING)Procedure for machine preparation for operation:‐ insert the electrode cable into the source socket А “+”;‐ insert the “mass” cable into the source socket B “–”;‐ connect the “mass” cable to the work piece;‐ connect the mains plug to the supply mains;‐ set power switch 14 on the rear panel to position “I”;‐ set the MMA welding mode by pressing the button 6; the modes switch overend‐around;‐ use buttons 1 to set the main parameter, which is welding current;‐ if necessary, additional functions of welding process can be adjusted—see achangeover sequence in Clause 6.1.Attention! Once the power switch is set to position “I” in the MMA welding mode,the stick electrode becomes energized. Do not touch conductive or earthedobjects, such as, for example, welding machine frame, etc., with the electrode,since the machine will take this as a signal to start the welding process.3.1 WELDING CYCLE – ММАSee Clause 6.1 for sequence of changing the value of any function.electrode holderpieceground terminalt, s