Patton electronics IPLink 2821 Getting Started Manual

Also see for IPLink 2802: Specifications

Contents

Patton electronics IPLink 2821 Getting Started Manual Manual pdf 39 page image

Installing the VPN router 39IPLink 2800 Series Getting Started Guide 2 • Hardware installation3. Verify that the AC power cord included with your VPN Router is compatible with local standards. If it isnot, refer to chapter 10, “Contacting Patton for assistance” on page 116 to find out how to replace it witha compatible power cord.4. Connect the male end of the power cord to an appropriate power outlet.Figure 8. VPN Router front panel LEDs and Console port locations (IPLink 2835 shown)5. Verify that the green Power LED is lit (see figure 8).Congratulations, you have finished installing the IPLink VPN Router! Now go to chapter 3, “Getting startedwith the IPLink Managed VPN Router” on page 40.The UI and EUI power supplies automatically adjust to accept aninput voltage from 100 to 240 VAC (50/60 Hz).Verify that the proper voltage is present before plugging thepower cord into the receptacle. Failure to do so could result inequipment damage.CAUTIONLink100MActivityEnet 0 ConsoleIPLink VPN RouterRunLink100MActivityEnet 1PowerLink100MActivityEnet 0IPLink VPN RouterRunLink100MActivityEnet 1PowerConsoleConsoleConsoleportPowerEnet 0LinkRunEnet 0100MEnet 0Activity Enet 1LinkEnet 1100MEnet 1Activity