Philips 1000 Series User Manual

Also see for 1000 Series: Quick start guide Quick start guide User manual Quick start guide Quick start

Pair the headphoneswith your Bluetoothdevice for the first timeOpen the top cover from chargingbox. The earphones will power onautomatically, entering pairingmodel and Right & Left earphonesconnected.Light on both earphoness isblinking (white and blue)The earphones is now inpairing mode and is ready topair with a Bluetooth device(e.g. a mobile phone).Make sure that the earphones isfully charged and powered off.Turn on the Bluetooth function ofyour Bluetooth device.Pair the headphones with yourBluetooth device. Refer to the usermanual of your Bluetooth device.6 ENNote After powering on, if the earphones cannotfind any previously connected Bluetoothdevice, it will automatically switch to pairingmode.Philips TAT1207The following example shows youhow to pair the earpieces withyour Bluetooth device.Turn on the Bluetooth function ofyour Bluetooth device, selectPhilips TAT1207.Enter the earpieces' password“0000” (4 zeros) if prompted. Forthose devices featuring Bluetooth3.0 or higher, there is no need toenter a password.121234Check left or right orientation of theearpiece.Insert the earpieces into the earsand twist slightly until a secure fit isachieved.Insert the earpieces12Single earpiece (Mono mode)Take either right or left earpiece outfrom charging box for Mono use. Theearpiece will power on automatically.You will hear a voice from the earpiecessaying “Power on”. Take the second earpiece from the chargingbox and they will pair with each otherautomatically.Note