Philips 272B1G/69 User Manual

Also see for 272B1: User manual User manual

2811. Troubleshooting & FAQsHorizontal flicker appears• Adjust the image using the “Auto”function in OSD Main Controls.• Eliminate the vertical bars usingthe Phase/Clock of Setup in OSDMain Controls. It is valid only in VGAmode.Image appears blurred, indistinct or toodark• Adjust the contrast and brightnesson On-Screen Display.An "after-image", "burn-in" or "ghostimage" remains after the power hasbeen turned off.• Uninterrupted display of still orstatic images over an extendedperiod may cause "burn-in", alsoknown as "after-imaging" or "ghostimaging", on your screen. "Burn-in","after-imaging", or "ghost imaging"is a well-known phenomenon inLCD panel technology. In mostcases, the "burn-in" or "after-imaging" or "ghost imaging" willdisappear gradually over a periodof time after the power has beenswitched off.• Always activate a moving screensaver program when you leave yourmonitor unattended.• Always activate a periodic screenrefresh application if your LCDmonitor will display unchangingstatic content.• Failure to activate a screen saver, ora periodic screen refresh applicationmay result in severe “burn-in” or“after-imaging” or “ghost imaging”symptoms that will not disappearand cannot be repaired. Thedamage mentioned above is notcovered under your warranty.Image appears distorted. Text is fuzzy orblurred.• Set the PC’s display resolutionto the same mode as monitor’srecommended screen nativeresolution.Green, red, blue, dark, and white dotsappears on the screen• The remaining dots are normalcharacteristic of the liquid crystalused in today’s technology, Pleaserefer the pixel policy for more detail.* The "power on" light is too strong andis disturbing• You can adjust “power on” light usingthe power LED Setup in OSD mainControls.For further assistance, refer to theService contact information listed inRegulation & Service Information Manualand contact Philips customer servicerepresentative.* Functionality different according todisplay.