Philips 4000 Series User Manual

Also see for 4000 series: Quick start guide User manual Quick start guide Service manual Quick start guide

98BDL4650D66• {Lock All} / {Lock all but Volume} / {Lock all but Power}/ {Lock all except PWR & VOL} - Disable the keyboardfunction.NOTE: To enable or disable the keyboard control lock, press[ ] and [ ] buttons simultaneously and keep pressingcontinuously for more than 3 seconds.TilingWith this function you can create a single large-screen matrix(video wall) that consists of up to 225 sets of this display (up to15-sets on the vertical and 15-sets on the horizontal sides). Thisfunction requires a daisy-chain connection.TilingH monitorsV monitorsPositionFrame Comp.TopFrame Comp. BottomFrame Comp. LeftFrame Comp. RightFrame Comp.EnableSwitch on delayBrightness1110000OffOffAutoNormalExample: 2 x 2 screen matrix (4 displays)H monitors = 2 displaysV monitors = 2 displays1 23 4H monitorsV monitorsPositionExample: 5 x 5 screen matrix (25 displays)H monitors = 5 displaysV monitors = 5 displays1 26 73 48 951011 12 13 14 1516 17 18 19 2021 22 23 24 25H monitorsV monitorsPosition• {H monitors} - Select the number of displays on thehorizontal side.• {V monitors} - Select the number of displays on the verticalside.• {Position} - Select the position of this display in the screenmatrix.• {Frame comp. Top} - set the pixel numbers of top framecompensation.• {Frame comp. Bottom} - set the pixel numbers of bottomframe compensation.• {Frame comp. Left} - set the pixel numbers of left framecompensation.• {Frame comp. Right} - set the pixel numbers of right frame.• { Frame comp.} - Choose to turn the frame compensationfunction on or off. If selected {Yes}, the display will adjustthe image to compensate for the width of the display bezelsin order to accurately display the image.• {Enable} - Choose to enable or disable the Tiling function. Ifenabled, the display will apply the settings in {H monitors},{V monitors}, {Position}, and {Frame comp.}.• {Switch on delay} - Set the power-on delaying time (inseconds). The default option {Auto} allows a sequentialpowering-on for each display by their ID number whenmultiple displays are connected. The options are: {Off/Auto/2-255}.• Brightness: {Normal}/{ACS}{Normal}: Apply OSD brightness value (backlight).{ACS}: Apply brightness value (backlight) which is adjusted byMIC tool. The default value before adjustment is the same asOSD brightness value, e.g., 70).Some brightness (backlight) settings cannot be adjusted byOSD. Please refer to Picture Menu Backlight setting priority.Off TimerSet the display to turn itself off to standby mode within aspecified period of time.The options are: {Off, 1 ~ 24} hours from current time.NOTE: When the “Off timer” is activated, the “Schedule”settings will be disabled.Date and timeAdjust the current date and time for the display’s internal clock.Date and timeAuto SyncYearMonthDayHourMinuteCurrent date timeOn2023020211562023.02.02 11:56:01Press [OK] To Set Clock1. Press [OK] button to enter or make a selection.2. Press [ ] back button to return.3. Press [ ] or [ ] button to adjust the settings.* Cannot set the time to any date after the year 2037.