Philips 65PFL5922/F8 User Manual

Also see for Essence 5000 Series: Quick start guide User manual Manual User manual Quick start guide

Installation1 Press MENU and use to select TV settings, then press OK.2 Use to select Installation, then press OK.InstallationFeaturesSoundPictureRestore default settingsPreferencesLanguageChromecast Built-in TV settingsAccessibility3 Adjust the following items.LanguageYou can set the language for the on-screen display.1 Use to select Language, then press OK.InstallationFeaturesSoundPictureAccessibilityEspañolFrançaisEnglishRestore default settingsPreferencesLanguageChromecast Built-in TV settings2 Use to select English, Español or Français, then press OK.Note(s)• If you need the English menu instead of the Spanish or French menu’s, press MENU.Use to select Ajustes de TV or Réglages de la télévision, then press OK.Use to select Instalación or Installation, then press OK.Use to select Idioma or Langue, then press OK.Use to select English, then press OK.Press MENU to exit the Main menu.PreferencesYou can set the unit to reduce the power consumption or adjust thebacklight brightness in Location setting.EasyLink allows you to operate your connected EasyLink device.SSetting your location to homeChoosing Home gives you full flexibility to change predefined settings forpicture and sound.1 Use to select Preferences, then press OK.2 Use to select Location, then press OK.TV placementLocationHDMI modeHomeRetailRestore default settingsPreferencesLanguageEasyLinkRetail Demo3 Use to select Home, then press OK.RetailThe unit will be set up with predefined settings forretail displays. In this setting, you can set the backlightbrighter.HomeThe unit is set to maximize the energy efficiency forhome setting and it can be adjusted through a choiceof picture and sound quality selections according toyour preference.Note(s)• You must set Home in the menu. Otherwise, personalized picture and sound settings will notbe memorized after the unit goes into standby mode.HDMI modeIf there are issues with picture/color and/or sound when connecting anexternal device using the HDMI port, please try switching the HDMI modefollowing the instructions below.1 Press and use to select Setup, then press OK.2 Use to select TV settings, then press OK.3 Use to select Installation, then press OK.4 Use to select Preferences, then press OK.5 Use to select HDMI mode, then press OK.6 Use to select HDMI1, HDMI2 or HDMI3, then press OK.7 Use to select Max 4K@60Hz + HDR, Max 4K@60Hz or Max4K@30Hz (Compatibility) depending on the output capabilities ofthe external device, then press OK.• When switching the HDMI configuration, the screen will black outfor a moment, then come back on.Note(s)• For HDMI 1 and HDMI3, Max 4K@30Hz (Compatibility) is the default setting, and for HDMI 2,Max 4K@60Hz + HDR is the default setting.• The HDMI connector with HDMI mode set to Max 4K@30Hz (Compatibility) supports up toUHD 30P, while The HDMI connector with HDMI mode set to Max 4K@60Hz supports up toUHD 60P. The HDMI connector with HDMI mode set to Max 4K@60Hz + HDR supports up toUHD 60P with HDR signal.• Switching the HDMI mode may cause loss of HDMI CEC functionality in certain cases.34 .EnglishContinued on next page.