Philips BDL4245E/27 User Manual

Also see for BDL4245E: User manual Brochure & specs

BDL3245E / BDL4245E / BDL4645E41.6. Mounting in Portrait PositionThis monitot can be installed in portrait position.1. Remove the table stand if they are attached.2. The “ ” logo should be on the LEFT side when facing the monitor.90 901.6.1. How to use the logo guider for portrait positiona. Before applying, make sure that the guider is in good condition. Fold the“ ” logo back in at the end of the guider.b. Peel off the back side of the protective film from the logo.c. Adjust the logo guider to align it with the long side of the front bezeland press the guider with your hand.d. Keep pressing the guider with your one hand and use the other hand tofold the logo out. Make sure that the logo is aligned with the front shortbezel. Press firmly and repeatedly on the logo to make the logo sticktight on the front bezel.e. Remove the guider.1.6.2. How to remove the logo1. Prepare a piece of paper with a cutting area of logo as a protector toprevent the front bezel from scratching.2. Using a knife, carefully remove the logo sticker with the paper placingbeneath.3. Tear off the logo sticker.1 2 3NOTE: When installing the monitor on a wall, please consult a professional technician for proper installing. The manufacturer accepts no liability forinstallations not performed by a professional technician.