Philips BDL4245E/27 User Manual

Also see for BDL4245E: User manual Brochure & specs

BDL3245E / BDL4245E / BDL4645E20Example: 5 x 5 screen matrix (25 monitors)H monitors = 5 monitorsV monitors = 5 monitors1 26 73 48 951011 12 13 14 1516 17 18 19 2021 22 23 24 25H monitorsV monitorsPosition• H monitors - Select the number of monitors on the horizontal side.• V monitors - Select the number of monitors on the vertical side.• Position - Select the position of this monitor in the screen matrix.• Frame comp. - Choose to turn the frame compensation function onor off. If turned on, the monitor will adjust the image to compensatefor the width of the monitor bezels in order to accurately displaythe image.Frame comp. - OffFrame comp. - On• Enable: Choose to enable or disable the Tiling function. If enabled,the monitor will apply the settings in H monitors, V monitors,Position, and Frame comp.• Switch On Delay: {Off / Auto / 2, 4, 6, 8, 10, 20, 30, 40, 50}NOTE: The Tiling function will be disabled when the [ON/OFF]button for PIP is pressed.Heat statusThis function allows you to check the thermal status of the monitor atany time. The accuracy of the temperature indicated is +/- 5 degrees (Cor F).Date and timeAdjust the current date and time for the monitor’s internal clock.Date and timeYearMonthDayHourMinuteDaylight saving timeCurrent date time2011 . 08 . 04 20 : 20 : 17Press [SET] to set clock2011080420201. Press [ ] button to enter the submenu.2. Press [ ] or [ ] button to toggle among the {Year}, {Month},{Day}, {Hour}, {Minute}, and {Daylight saving time} settings.3. Press [ ] or [ ] button to adjust all settings except {Daylightsaving time}.4. Press [SET] button to enter the {Daylight saving} submenu.5. Press [ ] or [ ] button to select item, press [ ] or [ ] buttonto adjust.ScheduleThis function allows you to program up to 7 (seven) different scheduledtime intervals for the monitor to activate.You can select:• The time for the monitor to turn on and turn off.• The days in a week for the monitor to activate.• Which input source the monitor will use for each scheduledactivation period.NOTE: You should set up current date and time in {Date and time}menu before using this function.1. Press [SET] or [ ] button to enter the submenu.ScheduleToday12345762011 . 08 . 04 THU 20 : 19 : 55On: :Every dayOff InputWedSATMONTHUSUNTUEFRIEvery week2. Press [ ] or [ ] button to select a schedule item (item number 1~ 7), and then press [ ] button to mark it the item number.