Philips HD5730/11 User Manual

Also see for HD5730: Manual User manual User manual Quick start guide

Contents

, Hot water comes out of the spout and flows into the bowl below.The message ‘FLUSHING...’ is shown on the display., The message ‘FLUSHING - Push OK when ready’ appears on thedisplay., When the water tank is empty, the message ‘FLUSHING DONE’appears on the display.The descaling program is now finished and the appliance is ready to brewcoffee again.Note: If the descaling program is interrupted before completion, the appliancecontinues to display the message ‘PLEASE DESCALE!’ and you have to start theprogram from the beginning again.Setting coffee temperature1 Press the MENU button., The button lights up.2 Press the ^ button until the message ‘SET TEMPERATURE?’ appearson the display.3 Press the OK button.4 Press the ^ or % button until the desired coffee temperature isdisplayed (low, medium or high).5 Press the OK button to confirm the temperature selected., The appliance automatically exits the MENU mode.setting auto-on timeThis function allows you to set a time at which the appliance automaticallyswitches on.1 Make sure the clock on the appliance is set as described (see section‘Setting current time’ in this chapter).2 Press the MENU button., The button lights up.3 Press the ^ button until the message ‘SET AUTO-ON?’ appears onthe display.4 Press the OK button., The message ‘AUTO-ON: Disabled’ appears on the display.5 Press the ^ or % or button to set the hour of the auto-on time.6 Press the OK button to confirm the hour set.7 Press the ^ or % button to set the minutes of the auto-on time.8 Press the OK button to confirm the minutes set., The appliance automatically exits the MENU mode.Note:When you switch off the appliance while an auto-on time is set, the >symbol appears next to the time on the unlit display.The clock and the symboldisappear after 5 minutes.EnglisH 21