Philips HD8930/02 Operating Instructions Manual

Also see for HD8930/01: Quick start guide Instructions

Contents

ENGLISH 75 Make sure the dispensing spout is in correct position. Move it horizon-tally until you hear the CLICK indicating the correct position.If this is not done, some product might leak out of the dispensingspout.1211 Switch the power button to "I" to turn on the machine.Note: The power button is located in the rear part of the machine.After carrying out a check cycle, the machine goes into stand-by modeand the " " button blinks.12 To turn on the machine simply press the " " button.Note: The language needs to be selected only upon fi rst use (see page 9).Note: Once the warm-up is complete, upon fi rst use the machine primes thecircuit and performs a rinse cycle of the internal circuits. A small amount ofwater is dispensed. Wait for this cycle to be completed.CLICK!6 Remove the coffee bean hopper lid.Note: The hopper may be provided with different safety features according tothe regulations applicable in the country of use of the machine.7 Slowly pour the coffee beans into the hopper.If the water tank is not inserted, check that no coffee beans fall into the tankcompartment. If this happens, remove them to avoid any malfunctions.Only coffee beans must be put into the coffee bean hopper. Ground coffee,instant coffee or any other object may damage the machine.8 Reposition the coffee bean hopper lid.9 Insert the plug into the socket on the back of the machine.10 Insert the plug of the other end of the cable into a wall socket withsuitable power voltage.