Philips HD8930/02 Operating Instructions Manual

Also see for HD8930/01: Quick start guide Instructions

Contents

ENGLISH 19Eco-friendly: Stand-byThe machine is designed for energy saving. The machine automaticallyturns off after 30 minutes of inactivity.Note:- During the turning off phase, the machine performs a rinse cycle, if a cof-fee product has been brewed.- Time can be programmed according to your needs (see page 34).To turn on the machine again, simply press the " " button (if the powerbutton is set to "I"). In this case the machine will perform the rinse cycleonly if the boiler is cold.Adjusting the Dispensing SpoutMost cups on the market can be used with this coffee machine.The height of the dispensing spout may be adjusted to better fit thedimensions of the cups that you wish to use.Manually move the dispensing spout up or down to adjust its height.Brewing CoffeeBefore brewing coffee check the lights on the display and make sure thewater tank and coffee bean hopper are full.Before brewing coffee, adjust the height of the dispensing spout accordingto your needs and select the aroma by using the adjustment lever; other-wise, select the pre-ground coffee.Cup-warming SurfaceThe machine features a cup-warming surface to keep your cups warm andready. Warm cups bring out the full aroma of coffee and let you enjoy itstaste in full.Place the cups that you usually use and wait until they are warm.Note: the cup-warming surface has a higher temperature than the othermachine surfaces, so we recommend not to touch it with sensitive body partsto avoid irritations.Using the cup-warming surface for other purposes is prohibited.The cup-warming surface is disabled by default for energy saving pur-poses. Refer to page 34 of the manual to activate is.