Philips HU5930 User Manual

Also see for HU5930: User manual User manual User manual User manual User manual

Contents

7ENEnglishPreparing forhumidification1 Pull out the water tank (fig. h).2 Pull out the water tray (fig. i).3 Remove all packaging materialof the NanoCloud rotaryhumidification wick (fig. j).Note• The humidification wick has beenassembled on the wick wheel uponpurchase.4 Place the wick wheel on the wicksupport (fig. k).Note• When placing the wick wheel on thewick support, make sure that theprojections on the wick wheel fallsinto the corresponding grooves.5 Place the water tray back into theappliance (fig. l).6 Turn the top cap of the watertank anti-clockwise to unscrew it(fig. m).7 Fill the water tank with cold tapwater (fig. n).8 Turn the top cap clockwise to tightlylock it onto the water tank (fig. o).9 Place the water tank back into theappliance (fig. p).4 Use theapplianceSwitching on and off1 Put the plug in the power socket.» The appliance sounds. ForHU5931, all lights go on onceand then go out again.2 Touch to switch on theappliance (fig. q).» The appliance operates underthe auto fan speed by default,and the default humiditysetting is " ".» The current humidity level willdisplay on the screen.3 Touch and hold for 3 secondsto switch off the appliance(fig. r & s).Note• After the appliance is switchedoff by the on/off button , if theplug is still in the power socket, theappliance will operate under theprevious settings when it is switchedon again.Tip• Touch the light on/off button toturn on or off the indicator lightsand display screen.• Touch the temperature buttononce and the current temperaturewill display on the screen for3 seconds. After that the currenthumidity level will display (fig. t).