Philips Saeco XSmall HD8743 User Manual

Also see for Xsmall HD8743: Operating instructions Operating instructions

14 ENGLISH3 Set the filter according to the measurements performed to set the wa-ter hardness. Use the water hardness test strip provided with the filter.Set the “Intenza Aroma System” as specified on the filter package.A = Soft waterB = Hard water (standard)C = Very hard water4 Put the filter into the empty water tank. Press it until it cannot movefurther down.5 Fill the water tank with fresh water and reinsert it into the machine.Write down the date of the next water filter replacement (+ 2 months).6 To activate the water filter, dispense the entire water tank by using thehot water function (see section “Hot Water Dispensing”).7 Fill the water tank again.The machine is now ready.1 Remove the small white filter from the water tank and store it in a dryplace.2 Remove the “INTENZA+” water filter from its packaging, immerse itvertically (with the opening positioned upwards) in cold water anddelicately press the sides so as to let the air bubbles out.HOW TO INSTALL THE “INTENZA+” WATER FILTER $OPTIONAL%You can purchase separately the Intenza+ water filter. Please refer to theaccessory page in this usermanual for further details.Water is a crucial part of every espresso-so it’s most important to alwayshave it professionally filtered. Using the “INTENZA+” water filter will preventmineral deposits from building up and improve your water quality.