C 6 Clean the pad holders in hot water, if necessary with somewashing-up liquid, or in the dishwasher.Check if the sieve in the centre of the pad holder is clogged. If this isthe case, unclog the sieve by rinsing the pad holder under a runningtap. Use a washing-up brush to clean the sieve, if necessary.C 7 Clean the water reservoir in hot water, if necessary with somewashing-up liquid.B The cover of the water reservoir can be removed to allow thoroughcleaning of the inside.B If you are using a washing-up brush, be careful not to damage the valvein the bottom of the water reservoir.8 Rinse the parts with fresh water after cleaning and put themback into the machine.C 9 Clean the water distribution plate with a moist cloth.Be careful when you do this; make sure that the rubber sealing ringdoes not get stuck under the edge of the water distribution plate. If itdoes, the coffee machine will start leaking!FlushingIf you have not used the coffee machine for three days, you have toflush it with fresh water before you use it again.Flush the machine in the following way:C 1 Fill the water reservoir with cold water up to the MAXindication and put it back into the machine.C 2 Put the 1-cup or 2-cup pad holder in the machine withoutpad(s).ENGLISH 11